TableTop epoxy resin is a pourable, self-leveling two-part crystal clear resin system that protects and preserves table tops, bar tops, and counters. It cures blush-free to a clear, glassy, 100% waterproof finish with excellent scratch, stain, and yellowing resistance. BPA-free formula contains no VOCs.
Need a lot more epoxy? TableTop is even available in a 110 gallon kit, with drums of resin and hardener. Please contact us for pricing.
Get the crystal clear, high-gloss, durable coating seen on restaurant bar tops and table tops
TotalBoat Table Top & Bar Top Epoxy makes it easy to get beautiful, glossy results on tables, bars, and counters whether you’re a professional or it’s your first time using epoxy. It cures to a clear, deep, glassy and 100% waterproof finish that provides excellent scratch, stain and yellowing resistance. Upon full cure, TableTop provides unsurpassed finish clarity while preserving the surface underneath for a lifetime.
Table Top Epoxy is great for embedding objects into your table, bar top, or counter top
Table Top Epoxy lets you cover a prepared level, horizontal surface containing just about any collection of personally priceless, glued-down objects (such as photographs, postcards, bottle caps, coins, charts, baseball cards, buttons) with multiple, thin layers of crystal clear protection. To make objects appear to float beneath the surface, embed them between coats. Just remember to seal delicate things (like photos) that the epoxy might damage, in an alternate clear coat before embedding them in the TableTop Epoxy.
Or, skip the glued-down objects altogether and just coat the flat surface as is. Wait 4-8 hours between coats to get the maximum self-leveling benefit and a crystal clear finish. Almost any horizontal, level surface is fair game. Chart tables, galley tables, cockpit tables, and coasters are just a few of the creative possibilities.
No BPA, No VOCs
It’s time to skip the noxious fumes and unknown safety of other resin systems. TableTop contains no volatile organic compounds, or VOCs. This means a safer, healthier work environment when you are stirring, pouring, and spreading. And, because the hardener component is BPA-free, Tabletop is more suitable for limited contact with food. Note: we don’t recommend using epoxy for a cutting board, though.
Unique 2-part, high-viscosity coating cures at room temperature.
Self-levels as it cures
Cures without bubbling or blushing.
Cures to a 100% waterproof, clear, deep glass-like finish on bar tops, table tops, and counter tops.
Resists scratches, stains, and yellowing.
Simple 1 to 1 mix ratio makes it very easy to use.
BPA-free, VOC-free formula makes TotalBoat Table Top a smart alternative to other products with harsh industrial chemicals.
Available in a variety of kit sizes to match your project size – 2 Quart, Gallon, 2 Gallon, and 4 Gallon.
Note: TableTop Epoxy is also available in a 110 gallon kit, with 55 gallon drums of resin and hardener. Please contact us for pricing.
Not sure how much table top epoxy resin you’ll need? Try our simple epoxy calculator to determine how much table top and bar top epoxy resin your project will require.
Kit Sizes
2-Quart Kit (1 Quart TableTop Epoxy Resin Part A, and 1 Quart TableTop Epoxy Hardener Part B)
1 Gallon Kit (½-Gallon TableTop Epoxy Resin Part A, and ½-Gallon TableTop Epoxy Hardener Part B)
2 Gallon Kit (1 Gallon TableTop Epoxy Resin Part A, and 1 Gallon TableTop Epoxy Hardener Part B)
4 Gallon Kit (2 Gallons TableTop Epoxy Resin Part A, and 2 Gallons TableTop Epoxy Hardener Part B)
Edge Taping: Before mixing the epoxy, contain the liquid epoxy by taping the edges of the top. Packing tape is best because it releases cleanly and easily after the epoxy cures.
Colorants/Tints: Epoxy dyes, colorants, or special effects additives can be added and mixed in. Only use products designed for use with epoxy.
Seal Coat Application: Brush
Maximum Pour Depth per Layer (Flood Coats): 1/8″ – 1/4"
Working Time: 20 minutes @ 77°F
Gel Time (150g mass): 30 minutes @ 77°F
Full Cure: 5-7 days
Shelf Life: At least 1 year (under proper storage conditions)
UV-resistant formula is not intended for outdoor applications with prolonged exposure to sunlight.
Do not place items hotter than 125°F on the cured surface, or it will become distorted and discolor.
PHYSICAL DATA
Cured Color/Finish: Clear, High Gloss
Mix Ratio by Volume: 1A:1B (1 part epoxy resin to 1 part hardener)
Coverage for 2-Quart Kit: At 1/8" thick – 6.4 square feet; at 1/4" thick – 3.2 square feet
Coverage for Gallon Kit: At 1/8" thick – 12.8 square feet; at 1/4" thick – 6.4 square feet
Coverage for 2-Gallon Kit: At 1/8" thick – 25.6 square feet; at 1/4" thick – 12.8 square feet
UV Stable: No
Hardness: 82 Shore D
THINNER, PREP & CLEANUP SOLVENTS
Thinner: Do not thin this product.
Surface Prep Solvent: Denatured alcohol, acetone (only for use on compatible substrates).
Cleanup: Part A – EPOXY RESIN: Denatured alcohol, acetone, vinegar; Part B – HARDENER: Warm, fresh water and a mild soap, or denatured alcohol; Mixed Epoxy: Scrape up and remove any uncured material, as needed. Denatured alcohol, lacquer thinner, or acetone may be used to clean up uncured, mixed epoxy. Cured epoxy must be removed mechanically.
HOW IT COMPARES
Table Top Epoxy
Best for:
Cured color:
Mix ratio by volume:
Mix ratio by weight:
Maximum pour depth per layer:
Application temperature/RH:
Working time:
Full cure time:
BPA free?
UV resistant?
Units of measure:
THIS ITEM
Table Top Epoxy
Best for:
Coating table tops and bar tops with a clear, high-gloss finish
Cured color:
Clear
Mix ratio by volume:
1A:1B
Mix ratio by weight:
100A:83B
Maximum pour depth per layer:
1/8" - 1/4"
Application temperature/RH:
70°F to 80°F, 0-85% RH
Working time:
20 minutes @ 77°F
Full cure time:
5-7 days
BPA free?
Yes
UV resistant?
No
Units of measure:
2 Quart Kit, Gallon Kit, 2 Gallon Kit, 4 Gallon Kit
MakerPoxy Crystal Clear Artist’s Resin by Jess Crow
Jewelry, coasters, geode art, coating bars and table tops, and ocean wave effect serving boards
Clear
1A:1B
100A:84B
1/8" - 1/4"
70°F to 80°F
60 minutes @ 77°F
5-7 days
Yes
Yes. For superior UV protection, coat with UV-blocking varnish.
8 oz. Kit, Pint Kit, Quart Kit, Gallon Kit
ThickSet Deep Pour Epoxy Resin Kits
Smaller castings and pours; ideal for castings using less than 16 fl. oz. per pour
Clear
3A:1B
100A:28B
1/2" for river pours, slab pours; 1" for smaller castings using less than 16 oz. of epoxy
How does Resin Table Top Epoxy hold up when left out in the sun?
Although resistant to yellowing, this product is not recommended for continuous outdoor exposure to UV light, and finishes may slowly lose their gloss or discolor over time if left outdoors. We recommend applying a varnish with strong UV resistance over TableTop epoxy for outdoor applications. Sand cured epoxy with 320 grit before varnishing.
How thick can you pour this resin?
We recommend doing multiple 1/8″ pours until you get to the desired thickness. Once a coat dries, you can recoat.
Does Table Top & Bar Top Epoxy Resin dry clear or does it have a color or tint?
Table Top epoxy cures blush-free to a clear, glassy, 100% waterproof finish with excellent scratch, stain, and yellowing resistance.
What should I use to apply it?
For the seal coat application, we recommend using a brush. For flood coat applications, pour on and spread with an epoxy spreader. Flood coats should be no thicker than 1/8″ each. Apply only in temperatures between 70-80°F. Warm conditions are critical for success!
What is the total working time and cure time?
The total working time will be about 20 minutes at 70°F. Gel time will be about 30 minutes at 77°F, and it will take about 3-5 days for it to be fully cured.
How long should I wait between coats?
We recommend waiting 4-8 hours (without needing to sand between coats).
What is the shelf life?
At least one year, as long as it is stored properly. We recommend storing the epoxy at 60°- 90°F in a dry place. After use, tightly reseal all containers.
What causes sticky or tacky spots and how can I fix them?
Sticky or tacky spots are generally caused by inaccurate measuring, not mixing thoroughly, or by curing in cold temperatures. Try moving your piece to a warmer spot: if it doesn’t dry, remove epoxy and start over.
At 1/8” thickness: 6 sq. ft. per mixed 2-Quart Kit; 12 sq. ft. per mixed Gallon Kit; 24 sq. ft. per mixed 2-Gallon Kit. At 1/4″ thickness: 3 sq. ft. per mixed 2-Quart Kit; 6 sq. ft. per mixed Gallon Kit; 12 sq. ft. per mixed 2-Gallon Kit.
Can this clear epoxy be used on floors?
No, it is not meant to be used on floors.
Is this epoxy heat resistant for table tops, bar tops, and counters?
The heat deflection temperature of TableTop Epoxy is around 124°F. It is best practice to wait about one week at room temperature for an epoxy surface to fully cure. We highly recommend using coasters and placemats, or else hot pans, plates, or cups might leave an impression on the surface.
Can Table Top be used for epoxy coasters?
Yes, it can be used for a variety of epoxy projects, such as crafts like jewelry, and coasters.
